Laser Measure - The New Alternative.
Using a traditional tape measurement tool is handy, but can be time-consuming. You need to position them in the correct position, in certain angles and tension. Yes, sometimes it can still be inaccurate if written in bad handwriting. You should look at the Bosch GLM 20 Laser Measure for doing this.
This review will help you see its innovative features and its performance. We have found some consumer’s concerns to reduce any unintended product bias. The laser measure is a fun but functional product, but that's a decision from reading of this article.
About Bosch GLM 20 Laser Measure
The Bosch GLM 20 Laser Measure is a quick, easier, and accurate way to measure the cut length of wood. It provides a precise laser real-time measurement mode that reaches to 65 feet. We found this on Amazon at a price around $41.
One of the most useful features of Bosch GLM 20 Laser Measure is its backlight screen. You'll find this feature useful when you need to measure anything in dark or low light areas. Anyone can increase their productivity by removing the guesswork. Your screen numbers give the result; it's simple and accurate.
The Bosch GLM 20 Laser Measure gives you the ability to use imperial and metric measurements. Use this device to measure the correct cutting line. It will hold your measurement until you’re ready to cut or mark the material.
The Bosch GLM 20 Laser Measure uses one button for its entire operation. Start by pressing it once and begin to take real-time measurements. Once you find the measurement you desire, press the button again to hold it on screen. Press the button a third time, and it will display and store the measurement. Holding the button for 3 seconds will completely shut the device off.
You might have wondered “how do I change my measurement units from inches to meters?”. To change the GLM’s measuring unit at any time, press and hold on the main button until the measurement unit shows up. This feature is good as it converts the units to improve your measuring precision.
You will like the size of this device because its a pocket compact. It’s only 4 inches long. This laser measurement device is the size of a pair of keys and easy to fit in you shirt pocket. It's brilliant, you get a useful tool that fits in your pocket.
I have found the Bosch GLM 20’s laser quality poor when used outdoors. I found the laser is hard to see when it’s placed on anything outside in direct sunlight. It is good using this laser measurement tool indoors or outside at night to get the best use from it.
Despite those issues, the Bosch GLM 20 is one of the best laser measurement devices in the market. You can it record measurements in any units and it has a memory to store your measurements while using it. Get one and you'll have a reliable tool in your garage toolkit.
Are you still confused on which measurement tool is the best for you? Continue reading for further assistance. When shopping, look for these following features and follow this advice to ensure that you’re getting your money’s worth.
The measuring range of your laser distance meter depends on the device you buy. The type of device depends on the scope of the project and how far you need to measure. For example, if you’re working on a large construction you will need range and visibility. A road construction worksite or industrial construction will need a more powerful device. You will want one that has a 300+ feet range.
But if you’re working on a small home improvement project in your home, you don’t need that quality of tool. Measurement will rarely need to be near to 100 feet. A real estate appraiser or a professional contractor may need a laser meter with a longer range. Few will need the power to measure in the range of 100-300 feet.
Almost every laser measure has to ability to display in the common measurement units. (Most display in feet, inches, decimal feet, and meters). Most laser tools can switch between the units of measure. You might prefer to buy a laser measure that shows your preferred units to prevent confusion.
Measure tools with a back-lit display are easier to see in bright glare situations. Screens and the laser is easier to see when there’s little or no light present. Not every model has this back-lit display feature, so it’s worth purchasing a laser tape that has.
Are You Replacing A Measuring Tool?
When you are using a long measuring tape, the longest ones are the hardest to get. Buy a measuring tool that solves those issues so that you won't struggle with them again. Bosch GLM 20 Laser Measure is an affordable single handed tool. Its design is for medium distance measuring.
On many construction sites, it can be hard to measure a particular straight line distance. This problem occurs because there are either machinery or people blocking the way. Often its because there are materials placed in the place you want to measure.
You can get a laser distance measurement using inbuilt geometry to measure distance. Use pythagorus geometry and the angle of the shot to find the horizontal distance of your target. You use the same method for vertical distance measures. This means that you can make your measurements over people, pellets, and machinery. With whatever is in the way you get to take the measurement that you need.
Using the laser measure is a lot safer and easier than dodging man lifts and climbing over objects. That omits the hazard of having a tape measure in your hand with moving machines at the site. Getting a laser distance measure makes it safer for you to make your measurements. It's easier and faster than using traditional tape measure tools.
We say that the Bosch GLM 20 Laser Measure is the best measuring tool for small and large-scale projects. Use it in dark or shaded areas and can make each measurements within seconds. Use this device to take accurate measurements and increase your skill in woodworking.