DEWALT 6.5 Amp Plate Joiner Review

DEWALT 6.5 Amp Plate Joiner Review

DEWALT DW682K Plate Joiner

Just picture this: You’re working on a beautiful table for a gift and now that it’s time to put it together. You realize that you’ve spent far too much time perfecting the smooth lines. Now you couldn’t possibly make it with screws or nails. What do you do?  Do you have a DEWALT DW682K plate joiner? If you have the DEWALT 6.5 Amp Plate Joiner, you could create strong, secure joints without needing screws or nails.

In our brief review, we are going to go over the features of the DEWALT DW682K 6.5 Amp Plate Joiner, and we are also going to give you a quick summary of what the customers who have purchased the biscuit joiner had to say about their overall experience with it.

Then at the end of this review, we’re going to give you our recommendation on whether or not this joiner is something you might want to consider purchasing for your own workshop!

About The Product

The DEWALT DW682K plate joiner is not your average joiner. This heavy duty tool is designed for production and it’s been engineered to perform for professionals. As a sign of its quality, the fence assembly and gear housing have been cast from magnesium.

The only pieces that are made from plastic with this machine are the motor cover and the rear grip. Even the chassis (which resembles that of a grinder) and the gear box located in the motor’s nose is made from metal.

Notable features of the DEWALT DW682K 6.5 Amp Plate Joiner include:

  • 6.5 Amp, 10,000 rpm motor provides power for working in the hardest woods
  • Dual rack and pinion fence ensure blade and fence are always parallel for accurate joints every time
  • ​Integral one-piece fence is adjustable and tilts 0-90 degrees
  • Flush cuts can be made at 0 degrees without removing fence
  • 45 degree locating notch in fence allows indexing off the outside surface of a mitered joint
  • Non-marring, heavy-duty aluminum shoe allows joiner to be clamped for stationary work
DEWALT DW682K plate joiner

The fence on this DEWALT DW682K plate joiner uses two racks and a single pinion that allows the fence to adjust vertically. It is this design that allows both sides of the fence to move as a single unit, ensuring that the fence will always be parallel to the cutter.

This units plunge mechanism moves along two slots that have been cut into the base plate. There is a stiff spring that retracts the blade after each use with very little to no drift outside of the desired cut direction.

The plunge depth can be set with a dial that is on the side of the joiner. You can choose one of four settings to give you the exact depth required for your biscuits. There is also a fine adjustment screw in the font of the fence so you can get a sure cut every time.

You needn’t worry about dust flying all over because this unit features an enclosed blade and a dust collector. When you make your cuts, the dust is ejected through a dust port that is located on the side of the tool. Any dust that you may see is just what comes from the throat of the joiner.

What People Had To Say

When looking at what people had to say about the DEWALT DW682K 6.5 Amp Plate Joiner, the majority of customers shared that they had good experiences with the tool.

Customers were impressed that they didn’t experience any change in the motor RPM when they used the tool on oak and maple. They also like that they can easily adjust the tool between #20 biscuits and #10 biscuits very easily.

DEWALT DW682K plate joiner

Other customers commented that they felt that the DEWALT DW682K plate joiner was very ergonomic, citing that the tool felt good in their hand and the front handle works wonderfully for keeping the joiner “flush and square.” Folks feel that with this tool, they are able to get their project done much quicker than without, and the end result looks beautiful because there aren’t any screw or nail holes.

Although the reviews for this joiner are positive for the most part, a few customers did leave some negative feedback about their experience with this tool. Of the negative review, customers were mostly disappointed that the tool created slots that were very narrow.

Because of these narrow slots, the customer couldn’t use the biscuits they had—even when purchasing “2 different brands” from “2 different stores.”

Several people also commented that the bottom or the front of the plate wasn’t flat. Others have said that the scoring on the face wasn’t good and the tool would “wiggle” because it wasn’t square. It’s worth pointing out that there were only a small handful of people with this problem and it could just be an issue with that particular lot.

Our Recommendation

You put a lot of effort into a project that you’re working on, right? So why would ruin the sleek look of your wood creation with crooked joints, or joints that are being held together with screws and nails? You wouldn’t! When you have a biscuit joiner like the DEWALT 6.5 Amp Plate Joiner, your project will have the secure joints without marring the aesthetic.

DeWalt Review

There are many biscuit joiners available on the market, however, the DEWALT 6.5 Amp Plate Joiner stands out from the rest. This particular joiner features a durable fence that can give you an accurate cut. The powerful motor can make short work of creating perfectly sized and aligned slots for your biscuits, making this tool perfect for professionals who’s time literally means money.

We like this DEWALT DW682K plate joiner because it is designed with your comfort in mind. The front handle is attached to the motor instead of the fence, thus giving you more control when you are making your cuts. If you’re looking for a joiner that has a great dust collection bag, adjustable angle and depth gauges, as well as being made from high quality, durable materials… Then this joiner is a great option!

Our Rating

Leave a Comment: